Week 24 This week we get the other wing tip and smaller spars for the middle wing
The bits we received
And what we did with them
Pretty much the same as week 20, but we have got the leading and trailing edge spars to add this week. Refer to week 20 for details about the ply parts. The leading edges were cut to length and simply glued in place. They were a good fit and didn't need holding in place.
The trailing edge spars wee cut to length, glued and held in place with pegs.
Here is a picture of the completed wing.
Hot tip of the week
If you look at one of the photos, you will see I've reversed some of the clothes pegs. Depending on what you're holding, they can sometimes hold better like this.
How many hours does it take to build the model ??
This week : |
3 hrs |
Running total : |
56 hrs |